ARK65/125, 2′ & 4′ Table
Pneumatic Plastic Bending Table (110V or 220V specify when ordering).
For: PP displays • Signs • Literature racks, etc. (Line Bending).
BBM125 4’Table
4ft Bending Table. Manual Top/Bottom Heat for faster cycle time and thicker material! 1x DB Controller.
AR 2′, 4′, 7′, 10′ Tables
Bending Tables w/ one heat tray and controller, AR50 (20″), AR125 (49″), AR220 (86″), AR300 (118″) models available.
ART ‘2, 4′, 7′, 10’ Tables
These tables have adjustable stops with a scale calibrated in either millimeters or inches. The height and temperature of the heating wires can be independently and continuous adjusted
AFF135 Automatic 4′
AFF135/AFF135-2 are easy-to-operate and very productive automatic bending machines for thin plastic sheets. Bend one sheet up to 4’5″ (135 cm) or multiple smaller sheets in a single pass
ARM 4′ Multiple Bars Machine
Very productive Shannon bending machines, standard equipped with under heating and consisting of quickly adjustable profiles with a heating wire (15 mm. or 30 mm. wide).
ARP 7′, 10′ Pneumatic Tables
ARP220 7′ and Shannon ARP300 10′ Heavy constructed professional bending machine with complete pneumatically operated top frame and adjustable stop with scale calibrated in millimeters/inches.
ARPD 10 Ft Auto Feed
The machine is constructed like an ARP300 with a 200 cm. top frame and extra automatic feed-and transport system.
ARPS 7′, 10′ Pneumatic Table
ARPS220 (7 foot) and ARPS300 (10 foot). Heavy constructed professional bending machine with complete pneumatically operated top frame and adjustable stop with scale calibrated in millimeters/inches.
ARTD Tables 10 Ft Semi Auto
These machines are constructed like an HRPS300 but without a top frame, and with an extra automatic feed – and transport system.
Bending Fixture 3000
Shannon Fixture 3000 (ARPD3000FX): 118 inch (300 cm) This extended fixture is easy to adjust and developed for large quantity production
FBM -Semi Auto Vacuum Feed
Specially developed semi automatic bending machine (foil bending machine) for processing large series of thin plastic plates with 1 or 2 bends
